MGI Research

A microscope on small businesses: Spotting opportunities to boost productivity

| Report

At a glance

  • Micro-, small, and medium-size enterprises (MSMEs) form the backbone of economies. Across the 16 countries we examine, MSMEs account for two-thirds of business employment in advanced economies—and almost four-fifths in emerging economies—as well as half of all value added. They also power dynamism and will play an important role in preserving competitiveness in an era of shifting global production.
  • Boosting MSME productivity relative to large companies could yield significant value. Small business productivity is only half that of large companies, and less in emerging economies. Raising MSMEs to top-quartile levels relative to large companies is equivalent to 5 percent of GDP in advanced economies and 10 percent in emerging economies.
  • Capturing this value requires a fine-grained view. Relative productivity of MSMEs and large companies varies widely across subsector and country. For example, in virtually all countries, eight subsectors out of 24 drive more than 60 percent of the value of narrowing the productivity gap in manufacturing, but the top ones vary by country.
  • A win-win economic fabric can improve productivity for both MSMEs and large enterprises. MSME and large company productivity move in tandem in most subsectors, indicating spillovers if the right conditions are created. For example, automotive MSMEs have gained operational proficiency through systematic interactions with productive original equipment manufacturers, and small software developers have benefited from talent and capital ecosystems seeded by larger companies.
  • All stakeholders have a role to play in developing granular productivity strategies. In subsectors where both small and large companies lag, infrastructure and policy improvements can target both together. Where MSMEs struggle but large enterprises outperform, building networks among them helps. Even where both large and small companies do well, strengthening their interactions could boost productivity.

Micro-, small, and medium-size enterprises (MSMEs) are the lifeblood of economies around the world. They account for more than 90 percent of all businesses, roughly half of value added, and more than two-thirds of business employment.1

But small businesses lag behind large companies on productivity. On average, their labor productivity, or value added per worker, is half that of their larger peers. Accelerating productivity growth has always been the sure way to deliver long-term prosperity, and MSMEs can—must—play a crucial role. Their contribution is potentially even more important amid the beginnings of a reconfiguration of global trade patterns.2Geopolitics and the geometry of global trade, McKinsey Global Institute, January 2024. Such shifts are unlikely to translate into a meaningful long-term realignment without a competitive network of MSMEs supporting and complementing large companies.

If MSMEs were to narrow the productivity gap with large companies, not only could that breathe new life into economy-wide productivity, employment, and growth, but economies and companies could raise their resilience in an uncertain world. The question is how.

Only by studying MSMEs at the fine-grained level can we understand where and why opportunities exist and plot a path toward higher productivity for all. After all, MSMEs are immensely varied. They range from a self-employed individual, such as a taxi driver or an online game designer; to a microenterprise with one to nine employees, like a laundry or a dental practice; to a small enterprise with up to 50 employees, such as a bakery or local auto repair chain; to a medium-size furniture manufacturing company or software business employing up to 250 people.

In this research, the McKinsey Global Institute (MGI) has aggregated a richly granular data set of MSME productivity across sectors and subsectors for 16 countries with different income levels accounting for more than 50 percent of global GDP. In this group (listed by per capita GDP in 2021 in purchasing power parity terms) are ten advanced economies: the United States, Germany, Australia, the United Kingdom, Italy, Israel, Japan, Spain, Poland, and Portugal; and six emerging economies: Mexico, Brazil, Indonesia, India, Nigeria, and Kenya.3 At the sector level, in the manufacturing sector, for instance, our data cover 24 level-two subsectors and 95 level-three subsectors.4 This enables us to explore the details of businesses that are highly diverse in size, economic context, degree of formalization, and, especially, the nature of economic activity in which they engage (see sidebar “Definitions, scope, and data limitations”). Most previous external analysis has tended to study MSMEs in a single country or has compared productivity among countries within a particular sector.5

This research focuses on the variation in MSME productivity relative to large companies across sectors, subsectors, and countries, enabled by our rich data set. We use this microscopic, but cross-country, lens to spot potential value and identify how MSMEs can work with other companies in specific business contexts to capture it.

1. Small businesses power the economies of today and tomorrow

MSMEs are ubiquitous and play vital economic roles across countries, albeit with important differences depending on whether they operate in an emerging or advanced economy.

MSMEs fuel economy-wide production and jobs

MSMEs create enormous value for economies around the world. They account for roughly half of global GDP. That share varies significantly among economies (Exhibit 1). In Portugal, Israel, Indonesia, Italy, and Kenya (ordered by decreasing share of value added), the share is larger than 60 percent. In the United States, Nigeria, and India, it is less than 40 percent.

1
MSMEs generate the majority of jobs and roughly half of total corporate value added.

Image description:

Two scatterplot charts appear side by side. The first one shows the share of value added in the business sector attributable to micro-, small, and medium-size enterprises (MSMEs) for different countries. MSMEs contribute about half of the value added in emerging economies (an average of 49 percent) and advanced economies (54 percent).

The second scatterplot shows that small businesses contribute about 70 percent of all employment in the business sector, with an average of 77 percent in emerging countries and 66 percent in advanced economies.

End of image description.

They are also significant employers, accounting for roughly 40 percent of all employment and 70 percent of employment in the business sector, which we define as excluding the farm, government, and finance sectors. That share is as high as 96 percent in Kenya, where MSMEs account for half of all employment.

MSMEs create enormous value for economies around the world.

The business sector plays a larger role in advanced economies. But within the business sector, MSMEs have a greater impact in emerging economies, employing four-fifths of all workers, compared with two-thirds in advanced economies.

MSMEs are also meaningful job creators.6 In advanced economies, one 2013 study suggested, they contributed more than half of net job growth in businesses.7 In the United States, for example, SMEs have accounted for two out of every three jobs added in the past 25 years.8 In emerging economies, MSMEs created seven out of ten new formal jobs over the past decade.9

MSMEs play a crucial role in production across sectors, but their contribution is more significant in some (Exhibit 2). While there are differences among countries, MSMEs tend to contribute the majority of the value added in four sectors—accommodation and food, construction, professional services, and trade. Although they contribute only about 45 percent of value added in the manufacturing sector, they are the second-largest contributor to small business value after the trade sector. Across all sectors, MSMEs also employ at least half of all business workers.

2
MSMEs operate in every sector, with varying economic contributions.

Image description:

A bar chart shows MSME contributions to value added and to employment in different sectors of the economy. MSMEs tend to contribute most of the value added in four sectors—accommodation and food, construction, professional services, and trade. Although they contribute only about 45 percent of value added in the manufacturing sector, MSMEs are the second-largest contributor to small business value after the trade sector. Across all sectors, MSMEs also employ at least half of all business workers.

End of image description.

MSMEs drive business dynamism

Many MSMEs grow rapidly into large companies, adding to the vibrancy and dynamism of the economies in which they operate. They promote innovation and competition among companies, encouraging all businesses to continually improve their products, services, and processes, which, in turn, can enhance overall economy-wide productivity and dynamism.

Many large companies of today were MSMEs not long ago. About one in five of today’s very large companies—defined as having a market capitalization of more than $10 billion in the United States and equivalent values in other economies—were MSMEs at some point after 2000 and have since powered their way to large company status.

The share of scaled-up companies varies by country, indicating different levels of MSME dynamism (Exhibit 3). Dynamic MSMEs can stimulate competition among businesses, driving the entire system to become more innovative and efficient, ultimately resulting in increased productivity.10 Yet overall, rising productivity—crucially, that of large companies—can create new market opportunities and build business capabilities for smaller enterprises, raising the rate of scaling up.

3
About one in five large companies scaled up from being MSMEs since 2000 but there is variation among countries.

Image description:

A bar chart compares the share of 2022 scaled-up companies (large public companies that were MSMEs at some point since 2000) in different advanced and emerging economies. About one in five large companies scaled up from being MSMEs since 2000 but there is variation among countries. Australia has the largest share of scaled-up companies in the sample with 44 percent, and Spain has the smallest with 5 percent. Indonesia has the largest share among emerging economies in the sample, with 31 percent.

End of image description.

Unique factors at the country level can contribute to dynamism. In Australia, high dynamism reflects a resources boom that has expanded growth opportunities for small mining companies. Israel, by contrast, has a small economy, but one of the most technologically advanced in the world.11 Its dynamism is connected to entrepreneurial ecosystems, a high density of skilled professionals, an ability to tap into global networks, and large-scale lending to MSMEs.12 Over the past decade, growth in bank credit to SMEs in Israel was higher than to large businesses, at 61 percent versus 16 percent.13 In India, only about 10 percent of large companies in 2022 were MSMEs at some point after 2000. Indeed, previous MGI research found that India has a “missing middle” of mid-size companies.14India’s turning point: An economic agenda to spur growth and jobs, McKinsey Global Institute, August 2020. MSMEs have faced structural barriers, such as the high cost of compliance and finance, that have tended to constrain their growth.

Researchers have found that high-growth businesses in advanced economies tend to be younger and intangibles heavy. Enterprises that tend to rely on profits rather than external financing to fund their growth are also more likely to scale up.15 Our analysis finds that in the information and communications technology (ICT) and mining sectors, one in three enterprises that are large today have grown from being MSMEs in the past two decades (Exhibit 4). These sectors seem to experience a fast pace of innovation and technological disruption as well as higher rates of investment.16McKinsey Technology Trends Outlook 2023, July 2023.

4
Mining and ICT companies scaled up more overall, while construction, utilities, and transportation MSMEs were more dynamic in emerging economies.

Image description:

A bar chart shows the share of 2022 scaled-up companies (large public companies that were MSMEs at some point since 2000) in different sectors (mining, information and communications technology (ICT), construction, utilities, manufacturing, trade, and transportation). A set of bars shows the numbers for advanced economies, and another set shows them for emerging economies. Mining and ICT companies scaled up more overall, representing more than 30 percent of all large companies in advanced economies. Construction, utilities, and transportation MSMEs were more dynamic in emerging economies.

End of image description.

MSMEs in the emerging economies in our sample seem to exhibit greater dynamism than in advanced economies in core sectors like construction, utilities, and transportation. Investment in physical infrastructure tends to rise faster in countries that are in the earlier stages of their development. Where such sector growth opportunities have been captured, we see greater business dynamism.

Some emerging economies have powered national growth through the manufacturing and trade sectors as well. In a similar analysis of companies founded after 1950, in China—not included in our sample, as noted—the dynamism of the manufacturing and trade sectors is higher than in the advanced economies on average.

MSMEs can boost national productivity while staying small or by fueling larger companies

In emerging economies, the MSMEs that are so vital to sustaining livelihoods are heavily skewed toward microenterprises. In India, Kenya, and Nigeria, microenterprises employ more than 90 percent of MSME workers, of whom some 90 percent are self-employed own-account workers and contributing family members. They face challenges of particularly low productivity.17

In emerging economies, the MSMEs that are so vital to sustaining livelihoods are heavily skewed toward microenterprises.

As these emerging economies climb the income ladder, microenterprises may grow their revenue and productivity, but most tend to stay small or medium size.18 As a result, MSMEs as a group continue to contribute larger shares to national output, and in that sense, MSMEs directly lift aggregate productivity growth.

In richer economies, the dynamic is different. Much of employment has shifted away from microenterprises to small and medium-size companies or even to larger ones. Only about half of all MSME workers are employed in microenterprises. As these advanced economies climb the income ladder, beyond a certain point more MSMEs tend to scale up into larger companies, are taken over and merged into them, or simply exit in the process known as creative destruction. As a result, the contribution of large businesses to the national output of the richest economies rises, relative to that of small companies. As such, MSMEs may not increase their share of economies, but they still contribute to business dynamism.

2. Boosting MSME productivity could yield significant value

Despite their central role in economies across the world, MSMEs are only about half as productive as large companies, and narrowing that gap could create significant value. Yet somewhat unexpectedly, this gap is by no means monolithic: relative productivity performance varies enormously across countries and sectors, and even within the same sector among countries.

MSME productivity lags behind that of large companies

The MSME productivity gap—defined as the distance between MSME productivity and that of large companies—varies among countries. For example, in Kenya, MSMEs are just 6 percent as productive as large companies, translating to a hefty 94 percent productivity gap. Among the countries we investigate, MSMEs are relatively most productive in the United Kingdom, at 84 percent of the levels of large companies, translating to a productivity gap of only 16 percent (Exhibit 5). In general, the productivity gap is larger in emerging economies than advanced ones.

5
MSME productivity lags behind that of larger firms across countries, with a wider gap in emerging economies.

Image description:

A bar chart compares the productivity of small companies (MSMEs) with that of large companies in different countries. The countries are divided into two groups: emerging economies and advanced economies. MSME productivity lags behind that of larger firms across all countries in the samples, with a wider gap in emerging economies. On average, MSMEs in emerging economies are 29 percent as productive as large companies. In advanced economies, MSMEs are 60 percent as productive as large firms. Productivity is measured in value added per worker.

End of image description.

As discussed in the previous chapter, within increasing income levels in emerging economies, MSME productivity rises steeply relative to that of large companies, whereas in advanced economies, the productivity of large companies rises noticeably.

The MSME productivity gap—defined as the distance between MSME productivity and that of large companies—varies among countries.

The size of MSMEs certainly plays a role in their productivity relative to that of large companies. Microenterprises trail large companies by a greater margin than do small and medium-size ones (Exhibit 6), and microenterprises account for much more employment in the emerging economies in our sample.

Yet in our sample advanced economies, only about 15 percent of the differences in MSME productivity among countries can be explained by the mix of micro-, small, and medium-size enterprises. The rest of the variation comes from differences in sector mix as well as how MSMEs in each country fare at a subsector level.

6
Microenterprises typically have a smaller productivity ratio relative to large companies than other MSMEs.

Image description:

A bar chart shows the same metric as in the previous exhibits, comparing the productivity of small companies (MSMEs) with that of large companies in different countries. The countries are divided into emerging economies and advanced economies. In this case, MSMEs are broken down into three categories: micro-, small, and medium-size enterprises. Microenterprises typically have a smaller productivity ratio relative to large companies than other MSMEs, with the United Kingdom being the only exception in the sample. The countries shown are Kenya, Brazil, and Mexico in the emerging economies group, and Portugal, Poland, Israel, Spain, Australia, Italy, Germany, Japan, the United States, and the United Kingdom in the advanced economies group.

End of image description.

Lack of scale matters more to the MSME productivity gap in some sectors than in others

Considering the broad sectors of our sample advanced economies, the MSME productivity ratio, averaged across economies, ranges from 49 percent in ICT to 104 percent in the administrative services sector. In other words, MSMEs in the ICT sector face the largest gap in productivity relative to large companies in ICT, while MSMEs in administrative services tend to outperform their large peers in productivity. Country-level differences within each sector are greatest in mining and utilities, and smallest in manufacturing and ICT (Exhibit 7).

7
The MSME productivity ratio varies among and within sectors and among countries, but less so in manufacturing and ICT.

Image description:

A dot-plot chart compares the ratio of MSME productivity to large company productivity in different sectors for a sample of advanced economies. The economies are Australia, Germany, Israel, Italy, Japan, Poland, Portugal, Spain, the United Kingdom, and the United States. The sectors are administrative services, accommodation and food services, utilities, trade, transportation, construction, professional services, mining, manufacturing, ICT, and other services. The MSME productivity ratio varies among and within sectors and among countries, but less so in manufacturing and ICT. The only sector where the MSMEs are more productive than large companies for the median of all countries in the sample is administrative services. MSMEs in the ICT sector are the least productive on average when compared to large companies.

End of image description.

Larger scale is generally associated with higher productivity. Yet being small has its advantages, too. Small businesses can be a vehicle for individuals to channel their entrepreneurial ambitions as well as for people who simply own and run a business for a living.19 They shape our social fabric and day-to-day life in important ways and are trusted by citizens. In the United States, for example, MSMEs are considered the most trusted institutions by the general public, more even than the military or the police.20 While small businesses do not have as much time and resources to innovate as large companies, their relative advantage comes from being closer to customers, being less bureaucratic, and reacting nimbly to changing market dynamics.21 They are able to effectively mobilize local labor and offer flexible work arrangements.

Small businesses also play a crucial role in enabling the productivity of large companies, which tend to focus on core competencies and outsource less essential activities to other businesses, a phenomenon called work fissuring.22 This results in greater concentration of higher-value-added activities in large companies, with smaller businesses taking on lower-value work. Similarly, in many advanced economies, as waves of labor-intensive manufacturing moved to countries with low labor costs—often to MSMEs in those countries—higher-value work remained with larger enterprises.

Moreover, being engaged in higher-value work enables large businesses to build three types of competencies: intangible capital, which comprises both better technology and superior human capital; global connections; and financial capital. Consequently, the MSME productivity ratio tends to be lower, and the productivity gap wider, in sectors where these competencies play a significant role in driving business competitiveness (Exhibit 8).

8
The productivity ratio is typically lowest in sectors that are intangibles-heavy, are export-intensive, and have better financial access.

Image description:

Three scatterplot charts are used to show that the ratio of MSME productivity to large company productivity is smaller in sectors where three competencies play a significant role in driving business competitiveness: intangible capital, global connections, and financial capital. The first scatterplot shows that the ratio is smaller in intangibles-heavy sectors such as ICT, manufacturing, and professional services. The second scatterplot shows that the ratio is smaller in export-intensive sectors such as manufacturing and mining. The third scatterplot shows that the ratio is smaller in sectors that rely more on traditional financing such as bank loans to secure working capital; for example, manufacturing and transportation.

End of image description.

  • Intangible capital. In sectors like ICT, manufacturing, and professional services, intangibles drive a larger share of value added and MSMEs have a wider productivity gap. Manufacturing productivity depends on organizational efficiency, the application of technology, and the effective utilization of capital—areas where scale makes a difference. In the mining sector, large companies have an advantage in undertaking explorations because they can invest effectively in acquiring geological information and in developing specialized know-how. In the ICT and professional services sectors, productivity drivers like automation, connectivity, and access to high-skill talent also become more powerful with scale. According to the World Bank Enterprise Surveys conducted between 2013 and 2022 and the OECD ICT Access and Usage by Businesses database, these are areas where MSMEs struggle.23 The share of MSMEs that adopt technologies like customer relationship management systems and artificial intelligence is only half the share of large companies. Large companies are twice as likely to provide formal skilling programs and are more active in monitoring performance and awarding performance bonuses. Large enterprises also contributed to 84 percent of research and development spending in the United States in 2015, spending more than five times as much as small businesses.24

    In sectors where intangibles matter less to competitiveness, the MSME productivity gap tends to be narrower. In such sectors, companies drive productivity through local reach and access to lower-skill labor. Examples are accommodation and food services, administration and support services, trade, and transportation.

  • Global connections. In sectors like manufacturing and mining where exports drive a larger share of value added, MSMEs have a wider productivity gap with large companies. In trade, however, MSMEs actively participate in cross-border activities, likely driven by commodity brokering in wholesale trade. This translates into a 70 percent share for MSMEs in all trade exports and a higher MSME productivity ratio.

    MSMEs are typically less able than larger companies to gain access to global markets and benefit from global procurement. According to the World Bank Enterprise Survey, MSMEs derive just 5.0 percent of their total sales from direct exports, but large enterprises triple that. In emerging economies, on average, MSMEs account for 2.5 percent or less of exports.25 In Indonesia, for instance, only 1.5 percent of small enterprises and 10.0 percent of medium-size enterprises participate in global value chains, compared with more than one-quarter of all large companies.26 Moreover, only about one-fifth of purchases of material inputs by MSMEs were of foreign origin, compared with more than one-third for large companies.

  • Financial capital. Access to finance is the second most cited obstacle for MSMEs in the World Bank Enterprise Survey. In sectors like manufacturing, other services, transportation, construction, and trade, where businesses typically rely more on traditional financing such as bank loans to secure working capital, MSMEs have a wider productivity gap. When the sector as a whole relies less on bank financing—perhaps because it is less necessary, as is the case in ICT—this may create a more level playing field, resulting in relatively smaller productivity gaps.

In addition to these competencies, small businesses may be disproportionately affected by lack of public infrastructure, such as reliable logistics networks, access to basic utilities like uninterrupted power supply, and the availability of 5G. Large businesses often have the ability to establish their operations in areas with robust infrastructure. They also can develop infrastructure themselves, such as investing in power generators and building last-mile connectivity. While this enabler is critical for MSMEs overall, it is difficult to differentiate at the sector level.

Narrowing the productivity gap is equivalent to 5 to 10 percent of GDP

The tremendous variation in MSME productivity ratios across countries indicates potential for improvement. In any given country, overall productivity stands to gain when the ratio of MSME productivity to large company productivity is brought closer to its full potential.

That potential varies by country given different underlying economic conditions. It depends on the industry structure in each business domain, as well as the specific nature of existing bottlenecks to growth, and the extent to which they are addressed to achieve the optimal economic structure. The productivity improvement itself may manifest in various ways. It could stem from some MSMEs increasing their productivity while remaining in their size bracket. Or it could result from a shift in the industry structure in which some small firms transition within the MSME category from micro to small or small to medium, or scale up to become large companies.

While meaningful benchmarks would vary based on local conditions, we compare the average ratio of MSME productivity to that of large companies in each country with the top quartile ratio across countries at a subsector level (see sidebar “Estimating the value of narrowing the productivity gap” for an overview of our approach). This exercise is a useful thought experiment to motivate an investigation of the specific drivers of MSME productivity and where to focus.

The gap between the actual productivity ratio and the top quartile level is equivalent to an average of 5 percent of GDP in advanced economies and an average of 10 percent in emerging economies. It ranges from 2 percent in Israel and the United Kingdom to 10 percent in Japan among advanced economies, and from 3 percent in Brazil to 15 percent in Indonesia and Kenya among emerging economies (Exhibit 9). On a per business worker basis, the amount is meaningful, ranging from about $3,000 in Israel to $12,900 in Japan among advanced economies, and from $3,200 in Mexico to $8,800 in Indonesia among emerging economies (all in purchasing power parity terms).

9
Narrowing the subsector productivity gap with large companies is equivalent to 2 to 15 percent of GDP.

Image description:

A map is used to locate several countries and indicate their MSME productivity gap with large companies. It measures the difference as a percentage of GDP, between current and top-quartile productivity ratio across subsectors. Narrowing the productivity gap would represent value equivalent to an average of 5 percent of GDP in advanced economies and an average of 10 percent in emerging economies. The potential value ranges from 2 percent in Israel and the United Kingdom to 10 percent in Japan among advanced economies and from 3 percent in Brazil to 15 percent in Indonesia and Kenya among emerging economies.

End of image description.

If we used lower thresholds to set benchmarks, the gap is lower, but still meaningful. For example, comparing the current MSME productivity ratio against the median ratio in each subsector, it is equivalent to 2 percent of GDP in advanced economies on average and 8 percent in emerging economies. Using bottom-quartile benchmarks, it would be about 1 percent of GDP on average in advanced economies and 7 percent in emerging economies.

Among advanced economies, the impact of narrowing the gap is larger in Italy, Japan, Poland, and the United States. In Japan, two-fifths of all MSME value added is in manufacturing and construction where, in many subsectors, MSMEs achieve only the bottom quartile of performance across countries. Similarly, in Italy and Poland, MSMEs in two-fifths of subsectors are in the bottom quartile of performance. In automotive trade, for instance, Poland has the highest productivity gap (73 percent) and Italy the second highest (67 percent) of our sample advanced economies. In the United States, MSMEs in almost half the subsectors are in the bottom quartile of the productivity ratio.

Where the overall gaps are smaller, as in Israel and the United Kingdom, the impact is limited. In these countries, about half the subsectors are already in the top quartile of MSME productivity relative to large companies.

The value is highest in four emerging economies—Kenya, India, Indonesia, and Nigeria—where MSME productivity gaps are the most substantial. In Kenya, the productivity of small businesses is the lowest of all the sample countries, explaining the wide gap. In Indonesia, the productivity of large companies is double that of the figure for other emerging economies, and therefore its MSMEs have further to go.

The sectors that produce the most economic output account for the largest share of GDP from improving their MSME productivity ratios. The three largest are trade, manufacturing, and construction (Exhibit 10). Nevertheless, some sectors in some countries punch above their weight relative to their role in economies. A standout example is ICT, particularly—in order of importance—in India, Nigeria, Brazil, the United Kingdom, Indonesia, and the United States. In these countries, the ICT sector contributes about 8 percent of economic value added on average, but about one-fifth of the value from narrowing the productivity gap. Other examples include transportation and storage in Australia, Kenya, and Israel; administrative services in Portugal, Kenya, and Germany; professional services in Nigeria and India; and accommodation and food services in Germany and the United Kingdom.

10
Trade, manufacturing, construction, and ICT represent the most value from narrowing productivity gaps.

Image description:

A heat map compares the contributions of different sectors of the economy to narrowing productivity gaps for a sample of ten advanced economies and six emerging economies. The heat map is darker for sectors in each county with a large share, with the darkest color indicating a share greater than 30 percent. The lightest color indicates sectors in each country with a share less than 10 percent. Trade, manufacturing, construction, and ICT offer the largest potential, driving more than half the value at stake in most countries.

End of image description.

3. Looking through a microscope to fill the gaps

To move the needle beyond broad-brush solutions, we need to look in detail at variations in relative MSME productivity performance to identify specific opportunities to achieve potential additional value. Consistent with MGI’s micro-to-macro analytical approach, we have looked at MSME productivity through a microscope, homing in on 68 level-two subsectors and 219 level-three subsectors. See the technical appendix for details of each of the 16 countries in our sample.

A granular approach helps prioritize where to act to boost MSME productivity

MSME productivity ratios vary across sectors, but the spread is even wider at the subsector level (Exhibit 11). For instance, in Germany’s sectors, ratios range from 55 percent in manufacturing to about 100 percent in transportation. In subsectors, the range is even wider. The spread is largest in administrative services, where the ratio is about 20 percent in rental and leasing activities and about 120 percent in building services and landscaping activities. There is a wide range in manufacturing, too. Small businesses engaged in the manufacture of tobacco products are only 35 percent as productive as larger counterparts, while those manufacturing basic metals are 85 percent as productive. In transportation, MSMEs engaged in postal and courier activities are less productive than large companies, while in warehousing, they are closely matched.

11
Within sectors, the MSME productivity ratio varies significantly among subsectors: Germany example.

Image description:

A dot-plot chart focuses on Germany and compares the ratio of MSME productivity to large company productivity for different subsectors in each of ten broader sectors. The economy sectors are administrative services, accommodation and food services, utilities, trade, transportation, construction, professional services, mining, manufacturing, ICT, and other services. Within German sectors, the ratio of MSME productivity to large company productivity varies significantly, and the spread is even larger at the subsector level. The spread is largest in administrative services, where the ratio is about 20 percent in rental and leasing activities and about 120 percent in building services.

End of image description.

This granular view at the subsector level is important when setting aspirations for, and thinking about ways to boost, MSME productivity. No single country can be considered the north star for all MSME productivity. The truth is that the best-performing MSMEs are found in one country for one type of activity, but in another country for another type of activity.

MSME productivity ratios vary across sectors, but the spread is even wider at the subsector level.

The trade sector illustrates this (Exhibit 12). In automotive trade, Japan’s MSMEs are more vertically integrated with large manufacturers than in many other advanced economies, including the United States (see chapter 5). This enables them to have more efficient logistics that follow just-in-time principles and respond effectively to market fluctuations, making them top-quartile performers.27 However, in retail and wholesale trade (excluding automotive trade), vertical integration among Japanese MSMEs appears to be weaker, and they fall into the bottom two quartiles of relative performance. In these sectors, the United Kingdom and Germany, respectively, present compelling benchmarks for Japan.

12
Within subsectors, the productivity ratio varies significantly among countries: trade sector example.

Image description:

A box-plot chart shows the ratio of MSME productivity to large company productivity for trade subsectors in different advanced economies. The three subsectors shown are automotive trade, retail trade, and wholesale trade. Trade is shown as an example of a larger trend: within subsectors, the productivity ratio varies significantly among countries. For example, Japan’s MSMEs are in the top quartile in automotive trade but lag behind MSMEs in other advanced economies in retail trade and wholesale trade.

End of image description.

Viewing MSMEs at a fine-grained level brings high-value subsectors into sharp focus. Considering manufacturing, for example, in almost all countries eight sizable subsectors (out of 24) account for more than 60 percent of the value from narrowing productivity gaps.28 In advanced economies, this ranges between five and 11 subsectors, while in emerging economies, the opportunity is more concentrated in four to eight subsectors.

While the sector overall contributes 18 percent of total value from narrowing productivity gaps in advanced economies and 25 percent in emerging economies, the opportunity is not uniform—the subsectors that offer the largest opportunities differ depending on the country (Exhibit 13). For instance, if we compare Indonesia and Australia, there are important differences. Manufacturing of basic metals, chemicals, rubbers and plastics, and food products are important sources of value in both economies. But in Indonesia, the apparel manufacturing subsector appears to offer meaningful value, whereas in Australia the textiles subsector is a sizable opportunity. For Indonesia, electrical equipment and automotive manufacturing would be higher priorities, but in Australia the comparable subsectors would be machinery and equipment, and fabricated metal.

13
A microscopic view of narrowing productivity gaps reveals variations by country: manufacturing example.

Image description:

A stacked bar chart shows the contributions of different subsectors from narrowing productivity gaps in the manufacturing sector for ten advanced economies and six emerging economies. To measure the value of narrowing productivity gaps for each country, we assume that the productivity ratio of MSMEs in the country in each subsector reaches a benchmark level (top quartile among all advanced economies) in the same subsector. The takeaway is that the subsectors that offer the largest opportunities vary significantly by country.

End of image description.

Looking through the microscope also helps to tailor efforts to build MSME competencies

The importance of scale for productivity and the hurdles that stand in the way of MSMEs gaining that scale are well recognized. So, too, are ways to address this issue, such as building national infrastructure and providing access to markets, finance, and technology. But national-level action is only one aspect of the competencies that MSMEs require to thrive and raise their productivity.

Which competencies matter most can vary depending on the type of MSME. For example, drawing on the World Bank Enterprise Survey, we find that more than one-third of MSMEs in the apparel manufacturing subsector report an “inadequately educated workforce” as their biggest obstacle to operations, but less than 15 percent in chemicals manufacturing do so. Because the business needs and hurdles to creating value are somewhat different in each subsector, solutions need to be tailored to local business and industrial contexts.

Because the business needs and hurdles to creating value are somewhat different in each subsector, solutions need to be tailored to local business and industrial contexts.

Take US construction as an example. This sector has one of the highest potentials for adding value because MSMEs perform poorly on productivity relative to large companies, at 46 percent against the top-quartile level of 60 percent in Germany. Large companies in the building construction subsector tend to concentrate on residential and nonresidential construction projects that typically involve larger projects, greater standardization, modular construction methods, and advanced technology and equipment—all of which help to boost productivity. However, MSMEs in the building construction subsector tend to focus on small-scale residential construction and refurbishments. They are subject to comprehensive building codes, regulations, and standards governed by local and state laws—factors that make it challenging for MSMEs to achieve higher productivity. This degree of stratification is not present in all countries in this sector. In the United Kingdom, for example, construction MSMEs receive incentives to participate in projects similar to those undertaken by large companies and are much more productive, relative to large companies, than their counterparts in the United States. Residential construction MSMEs in the United States could potentially diversify by becoming subcontractors to major players, helping them tap into potential additional value.

4. Creating value through networks and interactions

No MSME operates in a vacuum. Its prospects are shaped by its interactions with other companies. These interactions can be mutually beneficial, creating a “win-win” for businesses small and large. When the economic fabric surrounding companies of all sizes enables them to interact productively with one another and grow, the overall economy attains the greatest benefits.

B2B MSMEs tend to be more productive than B2C, suggesting that business interactions matter

Business-to-business (or B2B) companies interact closely with other companies, often larger ones, as part of their supply chains. In five sectors that account for the largest share of GDP from improving their MSME productivity ratio—construction, ICT, manufacturing, trade, and transportation—the productivity gap with large companies is narrower for B2B MSMEs than it is for business-to-customer (B2C) MSMEs that sell primarily to individuals. In fact, the gap is a significant 40 percent narrower on average (Exhibit 14).29

14
B2B MSMEs have smaller productivity gaps relative to large companies than B2C MSMEs.

Image description:

A bar chart compares the ratio of MSME productivity to large company productivity for two types of MSMEs: business-to-business (B2B) MSMEs and business-to-consumer (B2C) MSMEs. The types are compared across five sectors: transportation, ICT, manufacturing, construction, and trade. The conclusion is that B2B MSMEs have smaller productivity gaps relative to large companies than B2C MSMEs. The difference is most pronounced in the transportation sector.

End of image description.

The superior performance of B2B MSMEs can be attributed to both a selection bias, because business customers have higher expectations of their providers, and the fact that these MSMEs can benefit from lessons learned in the course of working with larger enterprises. Other research has also noted how large companies have an incentive to help the smaller businesses they work with to become more productive.30 There can, of course, be situations in which large companies take advantage of MSMEs, leading to less equitable division of benefits.31

The difference in productivity gaps between B2B and B2C MSMEs is particularly pronounced in the transportation and storage sector, where the productivity ratio of B2B MSMEs that transport commodities (typically via pipelines) is almost double that of B2C MSMEs, which are typically involved in passenger transportation. In the manufacturing sector, B2B MSMEs include manufacturers of iron and steel and of locomotives that, on average, have 60 percent of the productivity of large companies. In comparison, B2C MSMEs in the sector that, for instance, make consumer electronics and jewelry are only 40 percent as productive.

In the trade sector overall, the difference in the productivity gaps of B2B wholesalers and B2C retailers is not large. But in some subsectors, that is not the case. Take the specialized trade subsector where stores sell one type of product rather than a wide variety of products as nonspecialized supermarkets or department stores do. In this subsector, B2B MSMEs are 75 percent as productive as large companies operating in the sector—1.2 times higher than B2C MSMEs, which are only 63 percent as productive. The advantage in terms of absolute productivity is even higher. On average, B2B specialized trade MSMEs are 2.5 times more productive than their B2C counterparts. Interestingly, B2B and B2C MSMEs differ not only on productivity but also on their dynamism. B2B MSMEs are 1.5 times more likely to have scaled up than B2C MSMEs. Twenty percent of large B2B companies were MSMEs two decades ago, against 14 percent of B2Cs.

These gaps between B2B and B2C MSMEs reflect different levels of business competencies to some extent. Our analysis of the World Bank Enterprise Survey indicates that B2B MSMEs have an edge over B2C counterparts on some of the competencies that we discussed earlier, such as the following:

  • B2B MSMEs have a technology and innovation edge. B2B MSMEs are 30 percent more likely than B2C MSMEs to have introduced a process innovation in the past three years. International quality certifications are also 60 percent more common in B2Bs than in B2Cs, perhaps because they are often a requirement when doing businesses with large corporations.
  • B2B MSMEs invest more in building human capital than their B2C counterparts. B2B MSMEs track performance metrics more often and in more detail than B2C MSMEs. They also provide formal training to 60 percent of their employees, compared with about 35 percent of B2C MSMEs. One micro digital marketing agency in the United Kingdom offers employees a 20 percent “development time” commitment—for every ten hours worked in a week, employees can spend two hours on courses of their choosing.
  • B2B MSMEs are more globally connected. B2B MSMEs derive 6 percent of their revenue from direct exports, almost triple the share for B2C MSMEs. B2B e-commerce platforms that facilitate exports of products between small manufacturers and wholesalers or even offshore software services between companies have become increasingly popular.32Busting the five biggest B2B e-commerce myths, McKinsey & Company, January 2022. One microenterprise launched in 2000 created a platform to enable a transparent and mutually beneficial system of centralized MSME purchasing across European countries.

Large and small companies perform in tandem, and the right economic fabric can enable both

MSME interactions with other companies matter, but it is arguably a mistake to view those interactions as adversarial, necessitating policies that attempt to create incentives, quotas, or protections that tilt the balance toward either small enterprises or larger ones.33 Is this really a zero-sum game? The truth—broadly—is that both MSMEs and large companies can benefit when they are operating within the right economic fabric.

We looked at whether large company productivity moves in tandem with that of smaller businesses in subsectors (Exhibit 15). In accommodation, for instance, the correlation appears strong—the productivity of large and small enterprises moves hand in hand.34 In Italy, Mexico, Poland, Spain, and the United States, both large and small companies tend to outperform the average productivity levels of their peers across countries. In Australia, Brazil, Germany, Israel, Portugal, and the United Kingdom, both large and small companies tend to underperform their respective averages.

15
In two-thirds of subsectors, the productivity of MSMEs and large companies goes hand in hand.

Image description:

Four scatterplot charts are used to illustrate that in two-thirds of subsectors, there is a strong correlation between large company and MSME productivity. The accommodation subsector is shown as an example in a scatterplot, and another scatterplot shows the 45 strong-correlation subsectors. In the other one-third of subsectors, the correlation between large company and MSME productivity across countries is weak. The advertising and market research subsector is shown in a scatterplot as an example, and another scatterplot shows all 23 weak-correlation subsectors.

End of image description.

In other subsectors, the correlation is weaker. In advertising and market research, for instance, in Indonesia, Japan, and Nigeria, large companies outperform the average cross-country productivity while small companies underperform, and vice versa in Australia, Germany, Italy, and Spain.

In the vast majority of cases—66 percent, or 45 subsectors—the fortunes of MSMEs and large companies go hand in hand. This interdependent relationship is even more pronounced in manufacturing, where productivity levels of MSMEs and large companies are highly correlated (across countries) in about 80 percent of the 24 subsectors analyzed.

Within each subsector, we categorize countries where both large and small companies perform better than peers as win-win domains. If only one outperforms while the other lags behind, we classify it as either a “large firms outperform” or a “small firms outperform” domain. If both large and small firms lag behind their peers, it is considered a “challenged” domain.

How large is the win-win advantage? In the 45 subsectors where large and small companies are closely intertwined, the overall productivity of the win-win domain is $163,000 (in purchasing power parity terms). That is 1.5 times higher than in the domains where only small businesses or only large businesses outperform. This relationship holds true even for the subsectors in which the correlation is weak.

Other studies corroborate our finding that MSME productivity and large firm productivity are interconnected. One analysis of 26 European countries found that a 1.0 percent rise in MSME productivity is associated with a 0.124 percent increase in the productivity of large firms. While the analysis does not establish a causal relationship, there do appear to be some knowledge spillovers through the sharing of ideas, best practices, and even talent.35

5. Seven examples of win-win domains

Working closely with thriving large companies is one important route to higher MSME productivity, but not the only one. Network effects among small enterprises can help them attain competencies associated with scale. While MSMEs do not have significant market power because they have limited scale, creation of sector-wide infrastructure and boosting interfirm networks and linkages can provide “collective productivity”—the competitive advantage derived from local external economies and joint action—and substitute for direct benefits of scale.36

As countries try to reduce concentration and geopolitical risks, they are aiming to realign their global manufacturing and services footprints, but for this to happen, MSMEs need to raise their productivity game. Without MSMEs getting more productive, it’s hard to imagine a meaningful realignment of global production. Industrial policies that aim to create new manufacturing capabilities also need to focus on MSMEs in those specific ecosystems.

To illustrate examples of how win-win domains have been created in some countries, benefiting both small and large companies, we looked in detail at examples in the largest sectors for MSME value potential (Exhibit 16). Each of these case studies demonstrates how MSMEs have achieved high productivity through network effects.

16
Both large companies and MSMEs outperform in a wide range of sectors: seven case examples.

Image description:

Six scatterplot charts are used to illustrate seven examples of win-win domains, or domains in which both large companies and MSMEs outperform their counterparts. The examples shown, all in advanced economies, are: in manufacturing, the auto sector in Japan and beverages (wine) in Italy; in trade, wholesale trade in Germany; in construction, examples from both Australia and the United Kingdom; in ICT, software publishing in the United States; and in professional services, R&D in Israel.

End of image description.

In manufacturing, we examine the auto sector in Japan and beverages (wine) in Italy; in trade, the wholesale trade sector in Germany; in construction, examples from both Australia and the United Kingdom; in ICT, US software publishing; and in professional services, Israel’s R&D. Within each of these sectors, both MSMEs and large companies in the highlighted country generally exhibit higher productivity levels compared with their counterparts in other advanced economies. However, this does not necessarily imply that their productivity has increased over time. It is possible that they attained high productivity levels in the past and managed to sustain them over the years.

By looking through the microscope at these examples, a clear message emerges: there is no single path to success, but rather a range of promising possible approaches. A common characteristic of these approaches is their focus on addressing the issue of scale through structural changes, enabling MSMEs to become “collectively large” by creating network efficiencies.

There is no single path to success, but rather a range of promising possible approaches.

1. Japanese auto manufacturing MSMEs benefit from deep integration with large companies

On average, MSMEs in auto manufacturing in Japan have double the productivity of MSMEs in other advanced economies. This is predominantly because medium-size enterprises have close linkages to large companies. Benefits from best practices such as Keiretsu networks and vertical integration trickle down to them.37

With the overall credo of “we are all in this together,” large Japanese OEMs have built deep links with MSMEs, enabling their operational proficiency, and enhancing technological capabilities and access to talent for smaller companies. These deep linkages also extend to financing, with large OEMs often having crossover share investments with their MSME partners.38

Toyota is an example of a company that has unusually high integration with its ecosystem partners. Some contractual partnerships with suppliers have lasted for more than 30 years. Toyota has directly involved itself in raising the operational standards of its partners through knowledge transfer, from demand planning and cost reduction to raising management capabilities. In the 2000s, Toyota created three cost-reduction programs for its suppliers, in combination aiming to reduce costs by 60 percent. While many of Toyota’s MSME partners remain reliant on Toyota for more than 70 percent of their revenue, some have developed independently.39 These MSMEs share some common traits; they often harness their ecosystem partnerships to enhance their technological capabilities and venture into highly specialized production.

2. Italian winemaker MSMEs gain global market access through collective branding and marketing

Italy’s MSME beverage manufacturing sector—particularly its winemakers—is highly fragmented but superproductive. These enterprises are 1.5 times more productive than their counterparts in other advanced economies.

Winemaking typically has some very large players. In the United States, for instance, most wine is made by less than 0.5 percent of makers. But Italy’s wine business is dominated by small, often family-led enterprises. Fragmentation and a plethora of small players are not usually associated with high productivity, but there is a “paradox of scale” in productivity in Italy’s wine business.40 Why?

Italy has created an environment that delivers small players access to branding and marketing. The “Made in Italy” campaign has championed traditional and local production, with a particular focus on the international market. Italy has more than 500 wines that have Protected Designation of Origin or Protected Geographical Indications certifications. Similar designations have delivered success elsewhere, for instance in the cases of Alphonso mangos and basmati rice in India, and Guadarrama beef in Spain. These are stamps of quality in the eyes of consumers and apply to the 42 percent of Italy’s wine production that is exported, enabling small producers to charge premium prices and obviating the need to produce at scale. Where they are located is a key part of marketing. Layered on top of this is that Italy’s MSME winemakers are highly networked with one another through membership of associations or in cooperatives, giving them collectively a louder voice.

3. Construction MSMEs in the United Kingdom profit from better access to new markets and finance

In the United Kingdom, construction sector productivity has stagnated over time.41 But small businesses exhibit higher productivity than those in our other sample countries, as policy interventions in the United Kingdom have boosted their ability to respond to burgeoning demand. UK policy makers simplified procurement processes, reduced bidding costs, and accelerated payment timelines for construction projects, enabling MSMEs to compete with large companies for government contracts on a broadly equal footing.42 The government has also, more recently, orchestrated demonstrator projects to showcase modern construction methods and to enable small businesses to learn from one another.43

Although the impact of these enablers on productivity growth is not fully evident yet, they seem to have triggered a wave of creative collaborations among MSMEs. For instance, Cara EPS built a digital platform to bring together specialist retrofitter microenterprises, enabling them collectively to undertake substantial contracts leveraging their distinct expertise.44 MSMEs need to invest in innovation and technology to compete in the same markets as large companies. For ProBuild360, this involved developing capabilities in modern methods of construction and enlisting similar-sized MSMEs not only as suppliers but also as mentors to assist in the adoption of new techniques and materials. This enabled the company to emerge as a key building partner for social housing authorities.45

4. Construction MSMEs in Australia gain from subcontracting for larger companies and access to skilled workers

In specialized construction, particularly in the mining sector, Australia’s large players have higher productivity than those in our other sample countries, and MSMEs the second highest among their peers. This is attributable to collaborations between large and smaller players that have developed partly due to the country’s remoteness and climatic extremes, and partly due to effective public policies that encourage partnerships and facilitate a robust system of mutual cooperation.

MSMEs specialize in niche construction projects that are more often subcontracted than in other countries. Australia has one of the highest shares of public–private partnership construction projects in the world.46 The government has reduced red tape, cutting the number of regulatory procedures from 14 to ten and the average time it takes to approve permits from 150 days to 112.47 Skills building has also been a priority. Construction workers go through rigorous certification and licensing processes and benefit from a national system of vocational education and training, formal apprenticeship programs, and industry-led initiatives, such as Construction Skills Queensland.48

5. Germany’s wholesale trade MSMEs benefit from vertical integration with European manufacturers and strong logistics infrastructure

Germany’s MSME wholesalers are 1.3 times more productive than the average among advanced economies in our sample and are more productive even when excluding commodity traders. They are able to tap into global markets through the European single market, which is further bolstered by Germany’s central location, contributing to their productivity. They also benefit from Germany’s industry-wide logistics backbone, which is reinforced by a range of benefits conferred by free trade port zones, including tax reductions for imports and reexports, and simplified customs regulations.

German wholesalers are also among the most innovative in Europe.49 These enterprises gain spillover benefits from being part of a larger ecosystem. They often operate as legally independent affiliates or subsidiaries that are vertically integrated with upstream purchasers for retail supermarkets or distributors for large manufacturers for the entire European Union.50 An example is Coffee Friend, a medium-size wholesaler of coffee makers that mediates transactions for several manufacturers based in Europe.51

6. US software development MSMEs benefit from the network created by industry giants

In the dynamic US software publishing business, MSMEs are 1.7 times more productive on average than those in the same sector in other advanced economies. MSMEs gain from talent and capital ecosystems seeded by successful large companies. Large companies serve as reputational anchors, delivering market access and branding. A virtuous cycle of robust capital ecosystems and the agglomeration of a strong talent pool have enabled the growth of large businesses and continue to support the growth of MSMEs in this sector.

MSMEs in this sector are highly innovative and internationally minded. Small technology firms have patented more per employee than their large counterparts.52 Tech startups are also often seen as “born global” because they create products and services for a global market.53 Almost half of all US ICT MSMEs were engaged in international trade as long ago as 2007.54

Large companies in the sector are important clients, frequent buyers, and potential partners, and multiple connections mean that MSMEs are able to leverage a larger pool of resources and experience, including talent and capital.

7. Israel stands out for its ability to connect different stakeholders engaged in scientific R&D

The productivity of MSMEs in Israel’s scientific R&D subsector is almost double that of those in other advanced economies in our sample.55 Israel is a unique economy that ranks high among the world’s economies on the quality of its research organizations. The government has long been committed to promoting innovation and R&D, and has helped forge strong links between companies large and small, academia, and venture capitalists.

The productivity of MSMEs in Israel’s scientific R&D subsector is almost double that of those in other advanced economies in our sample.

The close proximity of businesses, research institutions, and venture capital firms in cities such as Jerusalem and Tel Aviv facilitates collaboration and networking. Universities actively encourage researchers to work on projects with commercial potential. Ties between academia and the private sector are strong, encouraged by the government setting up technology transfer offices to facilitate the process of licensing technologies to industry partners and creating startups based on the research undertaken. These close ties are particularly vital because Israel focuses on highly technical (and highly regulated) innovation, such as biotech, health tech, and pharmaceuticals. The Israeli venture capital industry has also thrived since the 1990s with help from governmental programs such as Yozma, which offered incentives to foreign companies willing to back Israeli startups.

6. Delivering a win-win future

Productivity is a hot-button issue for economies navigating particularly turbulent times. Indeed, accelerating productivity growth may be the only route out of current financial stress, reconfiguring global trade patterns, and shifts in companies’ manufacturing and services footprint to build resilience that delivers rising wealth and robust growth in GDP and incomes.56The future of wealth and growth hangs in the balance, McKinsey Global Institute, May 2023.

This research indicates that narrowing the MSME productivity gap with large companies can yield considerable value, and that large companies, policy makers, and MSMEs themselves can contribute to capturing that value by acquiring key competencies.

Improving the productivity of small businesses merits immediate attention. It may be a self-resolving issue—a natural progression as employment shifts to larger enterprises as economies develop. As discussed, this progression can play out in different ways. Some MSMEs may scale into larger companies, others may be acquired by larger enterprises, and some may cease operations and make room for new businesses. Indeed, previous MGI research suggests that high-growth emerging economies tend to be the ones where large companies are allowed to scale rapidly.57Outperformers: High-growth emerging economies and the companies that propel them, McKinsey Global Institute, September 2018. However, the extent of this natural progression is limited. Even in the most advanced economies, MSMEs continue to contribute the majority of all workers employed by businesses. Change is also likely to be slow. The clear implication is that, overall, MSMEs will continue to play an important role in the long term, and that acting now to boost their productivity growth can make the difference to economy-wide growth.

But given the enormous variation in productivity performance evident at the subsector level and even among enterprises with different business models, getting the conditions right for raising productivity requires a microscopic view to help prioritize, design, and implement solutions.

Three considerations can help shape stakeholder actions

Even with an abundance of initiatives and examples of efforts that stakeholders can make, understanding how to capture the MSME productivity opportunity is a complex exercise. Opportunities vary a great deal on the ground, and there are few one-size-fits-all solutions. Intentional measures targeted at helping small enterprises may even raise questions about how this might affect the overall productivity of economies. We suggest three considerations for stakeholders as they develop their approaches.

Creating a win-win economic fabric is important

The global business landscape is deeply interconnected. The success or failure of large companies can have ripple effects throughout entire economic ecosystems. As such, stakeholders, including policy makers, regulatory bodies, associations, and large companies need to foster the right enabling conditions for the growth and prosperity of all enterprises. These conditions may require measures that go beyond conventional policies focused on MSMEs, such as facilitating access to credit for MSMEs and encouraging training for MSME employees. In addition to such measures, it may involve strategies to build “collective productivity.”

Strengthening networks and interactions between large and small businesses can yield productivity gains in the win-win domains and in domains where large companies outperform their peers but smaller ones lag behind. Where small businesses outperform while larger ones do not, there would be benefit in enabling those small enterprises to evolve into large ones or merge with them to promote business dynamism. When both large and small companies lag behind their peers, more fundamental steps to improve the economic fabric as a whole may be needed; for instance, investing in physical and digital infrastructure, establishing transparent and fair regulatory frameworks that boost competition, reducing trade barriers, and ensuring equal access to financial capital.

Prioritization can pay off

Stakeholders first need to decide which economic domains to focus on to make MSMEs more productive. Failing to prioritize which opportunities to pursue can lead to a dilution of efforts and place a burden on the often-limited resources at hand. Some countries have selected and supported “national champion” sectors, as has happened with beverage manufacturing in Italy, automotive manufacturing in Japan, and R&D in Israel. Such prioritization requires meticulous identification of the nation’s competitive advantages and a keen eye for demand trends, as well as allocating resources toward innovation, facilitating access to capital, and cultivating supportive networks.

A granular and tailored approach matters

Measures designed to help MSMEs improve their performance tend to be broad, but the granular lens of this research reveals that different subsectors have varied needs. Stakeholders may need to design a menu of measures for each prioritized opportunity.58Unlocking growth in small and medium-size enterprises,” McKinsey & Company, July 2020. In other words, taking a microscopic approach that reflects the dynamics of each subsector and country and that addresses barriers to productivity and scale in that context is warranted.

All stakeholders can boost MSME competencies through a variety of proven approaches

All stakeholders—policy makers, large companies, and MSMEs themselves—can adopt strategies designed to boost productivity, which may involve structural changes that go beyond traditional approaches. Policy makers can provide access to better infrastructure, while large companies can help MSMEs build scale-related competencies. MSMEs can collaborate with others to achieve network efficiencies.

Policy makers can boost access to technology, new markets, and finance

Supportive policy interventions can create advantages of scale for MSMEs and help overall business dynamism. The following three broad contributions stand out:

In addition to these interventions, policy makers can also facilitate the availability of globally consistent yet granular data to enable all stakeholders to take a microscopic approach to understanding and thereby improving the productivity of MSMEs.

Large companies can boost the competencies of MSMEs within their value chains

As discussed earlier in this report, networks and linkages between MSMEs and large companies benefit the growth and performance of both. One study of small businesses in New York found that seven out of ten of them increased their revenue within two years of becoming part of a corporate supplier base.67 A 2023 study of Belgian companies found that when MSMEs started supplying superstar companies for the first time, their productivity increased by about 8 percent after four years. They also achieved an increase in sales to businesses other than the new superstar partner.68

But it is not a one-way street. As noted earlier, large companies also appear to benefit when their MSME partners and suppliers are more productive. This could be because large companies often depend on MSMEs in most parts of the value chain, from development to supply, production, service delivery, distribution, and sales and post-sales. For example, a large logistics player works with local delivery partners for last-mile delivery, and a small recruiting agency might help a large company fill key positions. Large companies therefore had an incentive to raise MSME capabilities. The following three ways are pivotal:

MSMEs can collaborate with one another to achieve network efficiencies

Collaboration among MSMEs can help build their capabilities. In Europe, for instance, 30 to 40 percent of SMEs do not belong to any formal network, but can still forge collaborations.77 That collaboration can even be at the level of individual MSMEs. Innovative companies cooperate on business activities with other organizations more than those that are not innovative.78 One OECD study of SMEs operating in Association of Southeast Asian Nations economies found that they perform better when they are allied with large enterprises, but also when they strike partnerships with other MSMEs.79 Japan’s Small and Medium Enterprise Agency has shown that SMEs that have partnered with other small enterprises in order to implement technology solutions in their operations have 76 percent more sales per employee than those that haven’t taken this route.80 For example, a small sheet-metal processor in Japan wanted to incorporate in-house cloud computing into its operations and partnered with two other enterprises in the same sector, but with different specialties. Together, the three companies built a joint order reception system, which enables them to collaborate on a range of projects with the same clients. All three MSMEs improved the digital and management capabilities of their manufacturing operations.81

Broader MSME collaborations at the association or group level can help more small businesses raise productivity through knowledge sharing, mentoring, networking, and online platforms. The SME Finance Forum works with more than 240 active member institutions—financial institutions, technology companies, development finance institutions, and relevant large corporations—to facilitate resources to help MSMEs bridge their financial access gap.82 The DIGITAL SME Alliance in Europe launched a platform for traditional SMEs to access a catalog of digital solutions ranging from videoconferencing to AI modeling.83

Other companies can also facilitate the creation of such MSME networks. For example, IBM, in collaboration with other Fortune 500 companies, launched a Supplier Connection initiative that connects small suppliers to one another and to large businesses to access new opportunities.84 SABI, an African digital infrastructure provider, fosters connections between MSME merchants, wholesalers, distributors, and manufacturers. It also provides them with enterprise resource planning tools, B2B commerce interfaces, and financial services, enabling MSMEs to reach new customers, improve their cash flow, and streamline their logistics.85


Raising productivity is, and always has been, the optimal route to healthier incomes and business resilience. In a world beset by uncertainty amid geopolitical tensions and shifts in manufacturing and services footprints, raising the game of the world’s MSMEs—which are so central to jobs, livelihoods, value creation, and economic growth—is a priority. The potential is large, but efforts to capture it need to be thoughtful and very likely targeted. Only by having a granular understanding of MSME productivity can effective action be taken. That action can create a win-win for all companies, small and large.

Explore a career with us